500x500mm Plastic Gravel Grids For Horse Stud And Buggy Paths

The Plastic Gravel grid is extremely tough and robust and can comfortably withstand horses, cattle and such like, they are also used for vehicles up-to around 20-25 (tested) tonnes including cars, vans and lorries. They are suitable for various domestic to light industrial surface reinforcement applications (see our 'Other Information' section for other uses and applications).

The open cell structure design of the Plastic Gravel 500 grid (X49 individual 70mm square pockets per grid) allows for neat compact and stable finish. 
Not only do the grids open cell structure provide extra walls of stability they also prevent lateral and downward migration and disruption of your chosen infill material.
For best results we would suggest to use sand, rubber grain, soil and gravel size tolerances of 5mm to 20mm maximum.

The Plastic Gravel modular design means the system can be added too at any time. With a simple and easy lateral jigsaw like push-snap fixing.

The Plastic Gravel is a high strength, UV stable, recycled, injection moulded plastic grid that is compression tested to a 'minimum' 500 tonne / SQM load test rating. 

Plastic Gravel minimises the construction work needed to provide a safe supportive surface for equine use, from menages, schools, arenas and even large public equine events. It provides a permanent, maintenance- free, safe and supportive winter riding surface solution.

The grids can also be installed in areas for over flow car parking, and access routes for maintenance vehicles too.

Specifications:
Dimensions    500 x 500mm
Deck Height    40mm
Rib wall thickness    3mm
Cell space openings    68mm x 68mm squares
Weight/m2    5kg (based on current recycled plastic, there can be a slight variation
Number of decks per m2    4
Compatibility    Modular design means the system can be added to or design changed at any time
Pallet capacity    240
Load Capacity    Up to 500+ tonnes/m2
Axle Weight    Up to 20 tonne axle load
Gross Weight per pallet    300 KG
Material - Recycled    100% UK Recycled - UV Stable Polypropylene
Temperature Stability    -50 to +90C
Filling    The grids can be filled with a wide range of materials including sand, soil - grass seed, rubber, gravels, stones etc
Environmental    None toxic, chemically enert and reusable too which makes the driveway grids

Additional applications & suggested uses:
*An sustainable grass & gravel paving & structure support solution
*Ground stability grids installed at ground level, to reduce the effect where vehicle and foot traffic pass over by stopping the ground from churning up.
*Access roads & emergency service lanes (fire & ambulance access routes)
*Driveway grids & gravel parking
*Grass or gravel car parks or temporary & permanent over-spill parking solutions
*Driveways and residential lawn/gravel parking reinforcement
*Anti storm – flood surface drainage solutions
*Water run off safety solutions & French drains
*Railway embankment stability
*Slope and embankment reinforcement
*Melioration ditches
*Horse stud, ménage and paddock use
*Buggy paths
*Disability access routes
*Golf courses paths & grass stabilisation
*School play area and access routes
*Event*/marquee flooring solutions
*Grassed garden banks
*Lawn protection
*Trellis supports & much more..